wrought iron  |  all weather wicker  |  teak  |  wood  |  aluminum  |  umbrellas  |  accessories  |  contract  |  tips  |  location/contact  home



Why buy from a Specialist? CLICK HERE  |  Design your own deck CLICK HERE

CARING FOR YOUR CASUAL FURNITURE

Aluminum Furniture: Apply a coat of liquid automotive wax or paste wax at the start of each season to frames and vinyl straps. In between waxings, wipe down the frame occasionally with a water and liquid detergent mixture. Use household prod­ucts like SoftScrub or toothpaste to remove stubborn stains and light scratch­es. For scratches, scrapes and rust, sand the area with steel wool or 400-600 grit wet or dry sandpaper. Then apply short light sprays of touch-up paint available at most outdoor furniture specialty stores. Spray WD-40 on chair swivel or glider mechanisms twice a season.

Iron & Steel: Wash occasionally and apply a liquid car wax at least once a year (preferably twice). Use SoftScrub to remove some stains and light scratches, or buy touch-up paint from a specialty store. If you notice any rust, immediately use a wire brush or fine-grained sandpaper to gently scrape it off. Then apply two coats of Rustoleum or a similar product and seal it with touch-up paint. During the winter months, cover the furniture, or if possible, bring it indoors. Spray WD-40 on all mov­ing parts twice a year.

Resin Furniture: Simple, periodic wipe-downs (especially after a rain) is the best method. A coat of paste-wax or acrylic floor wax applied annually will help flat or satin-finished resin maintain its look. Avoid abrasive cleaners or those with bleach. For tabletops, household products like Formula 409, Windex or Fantastic can be used.

Wicker & Rattan: Natural, untreated wick­er should be brought indoors when the weather turns cool. And like any wood, natural wicker and rattan is prone to dry out. Indoors, keep it out of any direct source of heat, and if you live in a hot, dry climate, lightly spray it with a hose peri­odically. Touch-up paint is available for nicks, scrapes and hairline cracks. For deeper scratches, scrapes or worn areas, lightly sand the area with fine-grit sandpa­per, clean, dry, and then touch up with paint. After years of use, any premium quality latex outdoor paint can be applied

to the frame for a fresher look. All-weath­er wicker is designed to be left outdoors. Periodically hose it off, and using a sponge, clean it with a mild detergent and water solution.

Wood: Regardless of the type, wood, left to its own devices, will weather to a silvery-gray hue. If you prefer the original look, lightly oil it with the appropriate oil or stain from an outdoor furniture specialty retailer in your area. Oiling traps dirt and darkens with age, so it will be necessary to scrub off the old oil periodically and recoat. To remove the graying from an already weathered piece of wood furni­ture, clean with soapy water and a poly ­bristle brush or pressure washer. For hair­line cracks, scratches or scrapes, use medium-grade sandpaper (this will also remove the graying) or a sealing wax that will help minimize the cracks. For painted wood, use an oil-based exterior enamel top coat. To help preserve the original paint, an overcoat of clear marine varnish can be applied. When not sheltered from sun and rain, painted woods require paint­

FABRICS

Acrylics Clean with a solution of luke­warm water and mild soap and then rinse thoroughly. Heavy stains and mildew can be removed with a solution of one gallon water, one cup bleach and two capfuls of dish detergent. Sponge this mixture on gently, allowing it to penetrate the fabric. Rinse well. Never use bleach or harsh detergents on an acrylic print.

Polyesters: Use a solution of soap or mild detergent and water. Rinse thoroughly. Never use bleach or any harsh cleanser on the printed fabric.

Olefin: Wash with a mild detergent and water. Wipe up spills with warm water immediately. If necessary, apply a laundry pre-wash and allow it to set for 10 min­utes, then wash with warm water and detergent. Rinse thoroughly.

Vinyl-Coated Polyesters: Prints or no prints, use mild detergent and water. Many stub­born stains can be removed with house­hold products like SoftScrub. For mildew, combine three gallons of warm water with one cup of laundry detergent and one cup of bleach. This also works well on strap furniture.

34

 


 

 
 


 

 

 A select member of the Canadian Interior Design Network.
     Click here to enter or return to
www.CanadianInteriorDesign.com
© 2010 Why Not Browse.com